JRV-ST11直動式減壓閥 韓國朝光減壓閥

■ FEATURES

1. This valve can operate stably from extremely large flow by the employment of special synthetic rubber diaphragm. 2. Maximum reducing pressure is very big. 3. Minimum differential pressure is very small. 4. This valve can be used while the secondary pressure is a minimum pressure. 5. Simple valve structure and small moving part means less mal-functioning of the valve by foreign matters as well as an easy maintenance. 6. Screwed type connection allows an easy installation.

■ Dimensions (Unit: mm)

SIZE d L H1 H A (kg) 15 ½" 110 57 207 124 5.0 20 ¾" 110 57 207 124 5.0 25 1 120 63 223 140 6.5 32 1¼" 150 78 278 166 12.0 40 1-½" 150 78 278 166 12.0

■ SPECIFICATION

Size 15, 20, 25, 32, 40 Applicable Fluid Steam Fluid Temperature MAX 184℃ Primary Applicable Pressure MAX 10 kgf/㎠{1.0MPa} Adjustable Secondary Pressure Range 0.2~2, 1.5~4 kgf/㎠{0.02~0.2,0.15~0.4MPa} Max. Reducing Ratio 20 : 1 Min. Difference Pressure 0.2 kgf/㎠{0.02MPa} Lock Up Pressure MAX 0.2 kgf/㎠{002MPa} OFFSET 0.2~ 2kgf/㎠ {0.02~0.2MPa} Spring : within 0.45kgf/㎠{0.045MPa} (Below 0.8 K of set pressure is within 0.5 times set pressure) 1.5~4kgf/㎠ Spring: within 0.6kgf/㎠ Min. Adjustable Capacity 2~5kg/h Allowable Leakage Below 0.05% of rated capacity Connection PT SCREW MATERIAL Body: Cast iron, TRIM: SUS, Diaphragm : Synthetic Rubber Body Hydro. Test 20kgf/㎠{2.0MPa}

■ Usage

Multi-purpose, heater, kitchen appliance, medical equipment, etc. This pressure reducing valve works best for those use steam pressure reducing purpose.

■ Characteristic